£0.00

Blueair 203 Slim with SmokeStop Filter

Go Back

Blueair 203 Slim with SmokeStop Filter

£255.00

  • HEPASilent® removes particles down to 0.1 micron that cause breathing issues
  • SmokeStop removes gases, VOCS and formaldehyde that aggravate breathing
  • A robust steel casing removes any negative impact of plastics
  • Extremely quiet operation is great for both work or living environments
  • The Blueair 203 will clean the in a room up to 37m2 at 3 air changes per hour

3 in stock

HEPASilent® technology filters remove particles that cause breathing issues

The HEPASilent® technology allows Blueair to use less dense filter media. This means it will achieve the same or even better efficiency than air purifiers using traditional HEPA filters. With high airflow and high efficiency, HEPASilent® delivers more clean air and gives a better indoor air quality. Ideal for the removal of dust mite debris, household dust, pet allergen, mould spores, bacteria and some viruses.

For more detailed information view the HEPASilent® detail tab.

SmokeStop technology filters remove gases, formaldehyde and VOCS that aggravate breathing

SmokeStop technology includes a filter with enhanced activated carbon. This dramatically reduces gaseous pollutants. Pollutants include exhaust fumes, cigarette and cigar smoke, carbon monoxide, ethylene oxide, ozone, formaldehyde and other VOCs. Adding activated carbon to a filter may affect airflow and CADR between 5 -10%. You may also notice a slight odour from the carbon when the filter is first used; this will quickly dissipate.

For more detailed information view the SmokeStop detail tab.

The Healthy House® offers the range of Blueair replacement filters to help you maintain your Blueair 203SM.

Take a look at our Filter Replacement Service tab for peace of mind.

A robust steel casing removes any negative impact of plastics

The Blueair 203SM casing is made from galvanized steel. It is tough enough for the most challenging environments and also beneficial for those who suffer from issues with plastics.

Extremely quiet operation is great for both work or living environments

The Blueair 203 Slim Air Purifier technology allows for an incredibly quiet operation. This means it won’t impact at all on a work environment, a living room environment or even in the bedroom, it will simply sit unnoticed doing its job to improve your environment as you live, work and sleep.

The Blueair 203 will clean the in a room up to 37mat 3 air changes per hour

The Blueair 203SM air purifier will easily filter the air in your room size up to 37m2 three times an hour on the high setting. This differs from the information on the box since Blueair rate their machines with at 5 air changes per hour. The Healthy House® recommends their air purifiers based on a minimum of 3 air changes per hour.

Click here to view all Blueair Air Purifiers

Additional information

Weight 13 kg
Multi Select Filtration

, , , , , , , , ,

Room Size (m²)

Warranty

5 years

Air Flow Range (m3/hr)

100-290

Air Purifier Technology

, ,

Independent Ioniser

UV Bulb

Ozone Output

Noise Levels

Brand

Power Consumption

20-80W

CADR Combined

Filtration Size

Dimensions (mm) HxWxD

Filter Replacement Indicator

Filter Longevity (mths)

Colour

Speed Settings

Auto Mode

Night Mode

Remote Control

Digital Display

Timer

Casing Material

Galvanised steel

Positioning

Air Inlet Position

Air Outlet Position

Product Weight (Unboxed)

Other Features General

Handles to assist moving, Filter Timer

Manuals & Documents

Click here to download the Blueair 203 Slim user manual

 

Click here to download the HEPASilent™ technology information

 

Click here to download the Blueair product brochure

 

Click here for Blueair SmokeStop™ technical information

 

Click here for effective levels of Activated Treated Carbon Adsorption

HEPASilent® technology information

 

HEPASilent® technology unites the best in electrostatic and mechanical filtration. The combination of advanced filter media and an encapsulated particle charging chamber ensures that Blueair air purifiers deliver the best results. These results are far superior than either mechanical or electrostatic technology alone. Even on the lowest setting, HEPASilent® air purifiers capture 99.97% of airborne particles down to 0.1 micron in size.

 

Millions of ultra-thin fibers of different sizes and layers are interwoven. this creates the progressive filter design. Locking in particles at different stages the captured particles are never released back. They are retained even when filters are heavily loaded. The early layers capture larger particles like pollen and dust. Later filter layers capture smaller bacteria and exhaust particles.

 

The HEPASilent® particle filtration technology consists of two steps (fig. 1):

 

1 Charging section for incoming particles.

 

2 Trapping section for charged particles.

 

In the first step, an ionizer (a high voltage module) fills a chamber with negative ions. Incoming particles will then collide with the ions. These transfer their energy to the particles, giving the particles a negative electrostatic charge.

 

In the second stage, a gradient structured synthetic filter traps the charged particles. The filtration effect in the media is a combination of mechanical and electrostatic forces.

 

Bigger particles (>1 micron) are trapped mainly due to mechanical forces. Smaller particles (<1 micron) are mainly trapped with electrostatic forces.

 

A traditional filtration media is good at capturing big particles such as dust and pollen. Pollen can vary from 10-100 microns and dust about 1-10 micron. These large particles are easily trapped by the filter media fibers like mosquitoes trapped in a mosquito net. It offers a filtration efficiency of up to 100%. Smaller particles, less than 1 micron, penetrate the filter media. They are so small they can follow the airflow around the filter fibers and exit on the back side of the filter. The result is a low filtration efficiency.

 

Ionising assisted filtration

Fig. 1 In the first step, the charging section, incoming particles enters the ionizer where they are negatively charged. The charged particles are then trapped by the gradient structured filtration media. This mechanical filtration is the second step. The clean air proceeds  effortlessly through, free from particles.

 

By giving the particles an electrostatic charge, the filtration efficiency for small particles increases. When the charged particles comes near a filter fiber, an attraction force emerge between the particles and the fiber. The particles move towards the fiber and stick to its surface, instead of following the airflow stream through the filter, fig. 2.

 

air flow

Fig. 2 Uncharged particles follow the airflow stream pass the filter fiber while charged particles are forced from the airflow path by attraction forces.

 

An example of the effect of the HEPASilent® filtration system is shown in fig. 3. When the electrostatic force is added to the mechanical filtration the filtration efficiency for smaller particles will increase. It is possible to use different combinations of charging sections and filter media to get desired filtration efficiency and fig. 1 shows one of the possible options.

 

filtration efficiency

Fig. 3 The mechanical filtration efficiency (red) increases with the particle size while the electrostatic (green) decreases and has higher effieciency in capturing small particles. A combination of both mechanical and electrostatic filtration systems make a total efficiency of 99-100% of all particle sizes

 

Replacing the filters

Blueair recommends changing your filters every 6 months to maintain efficiency. A filter change indicator is included in the Blueair air purifiers. Take a look at our Filter Replacement Service tab for peace of mind.

 

Material compostion

Manufactured from polypropylene, an environmentally responsible synthetic material. It ultimately breaks down into carbon dioxide and water. The filters will only capture mould particles from the air, never grow their own, as they are a naturally antibacterial material.

SmokeStop Filtration Detail

The SmokeStop filters are gradient structured filters with ultrasonically/thermally bonded fibres containing polypropylende and polyethylene free of chemicals and binders. They are naturally anti-bacterial, fibre shedding resistant and equipped with enhanced activated carbon. The SmokeStop filter removes not only airborne particles but also gaseous pollutants such as cigarette and cigar smoke, formaldehyde or VOCs (volatile organic compounds) including household paints and other chemicals.

 

Adding activated carbon to a filter may affect  airflow and CADR. You may also notice a slight odour from the enhanced activated carbon when the filter is first used, but this will quickly dissipate.

 

Click here to download the information sheet detailing the effective levels of activated treated carbon adsorption. 

 

Replacing the filters

Blueair recommends changing your filters every 6 months to maintain efficiency. A filter change indicator is included in the Blueair air purifiers. Take a look at our Filter Replacement Service tab for peace of mind.

 

Material composition

Enhanced activated carbon and constructed from polypropylene, an environmentally responsible synthetic, which ultimately breaks down into carbon dioxide and water. A naturally antibacterial material, the filters will only capture mould particles from the air, never grow their own.

 

View all of our air purifiers for smoke removal here.

Blueair air changes

 

Blueair air changes chart

Filter Replacement Service

 

Whether you purchase air purifiers, dehumidifiers or water filters, or any of their replacement parts we offer you peace of mind. We will add your name to our reminder service. In accordance with the manufacturers’ guidelines we will send you a gentle reminder that your unit may need replacement parts. Maintaining its efficiency will continue providing you a healthier environment.

 

We will be able to supply you with your required replacements. We maintain stock levels of filters and cartridges even after a manufacturer may bring the original unit to an end. This means our customers can rest assured of our commitment to servicing their requirements long into the future.

 

If you do not wish to be included in our service then we can simply unsubscribe you. Similarly, if you have not purchased the units or replacements from us before you may ask to be included in our service for future use.

 

With best wishes

 

                             The Healthy House® Team

You may also like…

Expert Advice
Free Shipping
5 Star Reviews
Secure Shopping