£0.00

Whole House WHH3 for Heavy Metal and Chlorine Removal

Go Back

Whole House WHH3 for Heavy Metal and Chlorine Removal

£360.60

  • Clean filtered water on tap throughout your home
  • A Heavy Metal filter reduces lead and other heavy metals
  • A carbon filter offers clean drinking, cooking, washing and bathing water
  • Enjoy healthier skin by removing dehydrating chlorine
  • Have better tasting water by removing the taste of chlorine
  • The capacity will deliver to a 4 person household

Out of stock

Clean filtered water on tap throughout your home

A whole house water filter removes chlorine and organic compounds from all water used throughout your home. If you or someone in your household struggles with sensitivities or other issues due to additives or impurities in your water the whole house water filter offers peace of mind. It also offers more luxurious bathing and finer cooking with cleaner water.

Heavy Metal filter prolongs the life of main filter saving you money

The Heavy Metal filter will remove heavy metals including lead and mercury from your water. It will also act as a pre-filter removing particles before the water goes through the carbon filter in the second pod.

A carbon filter offers clean drinking, cooking, washing and bathing water

The average water usage per day is 150 litres. So for a 4 person household the amount of water used will be about 600 litres. We recommend that the filters are changed every 6-12 months.

The carbon block filter is effective at reducing content of chlorine and chlorination by-products, concentration of toxic heavy metals, phenol, oil products and pesticides. Improves colour, taste and odour in the water.
Due to its block structure the filter also reduces sediments up to 10 microns.

For extra filtering of bacteria, viruses, fluoride and heavy metals from your drinking water we recommend a drinking water filter.

The WHH3 whole house water filter includes a heavy metal filter and an activated carbon filter. If you have a larger household or you have poor water pressure you may need a WHH6. 

Additional information

Water Filtration

, ,

Warranty

5 years on casing

Brand

Dimensions (mm) HxWxD

Manuals & Documents

Click here to download the WHH3 whole house installation instructions

Whole House Heavy Metal Filter

 

General filtration

The Heavy Metal filter contains KDF which removes dissolved gases such as chlorine, hydrogen sulphide and methane, controls bacterial growth reduces levels of microorganisms and will remove virtually any soluble heavy metal – see below.

 

Heavy metals removal

List shows levels in unfiltered water (in brackets) and levels once the water has been filtered in PPM (particles per million)

 

   Arsenic (5)  0.01
   Cadmium (5)  0.01
   Lead (2.05)  0.1
   Mercury (1)  0.001
   Silver (1)  0.01

 

Filter capacity

A single Heavy Metal filter has a 300,000 litre capacity.

 

Replacing the filters

We recommend replacing the filter(s) every 12 months or when they reach their filtration capacity, whichever is sooner. Take a look at our Filter Replacement Service tab for peace of mind.

 

Independent quality control testing

The wholehouse filters are manufactured with ISO9001: 2000 Quality Assurance. NSF (National Sanitation Foundation), WRAS (Water Regulatory Advisory Scheme) and The Water Quality Association use a very strict set of criteria to continually monitor the filters and performance of the units.

Whole House Carbon Block

Provides clean drinking, cooking and bathing water.

The carbon block filter reduces content of chlorine and chlorination by-products, concentration of toxic heavy metals, phenol, oil products and pesticides.
Improves colour, taste and odour in the water.

Due to its block structure the filter also reduces sediments up to 10 microns.

Max filter capacity 25,000 L

Replacing the filters

We recommend replacing the filters every 6-12 months or when they reach their filtration capacity, whichever is sooner. Take a look at our Filter Replacement Service tab for peace of mind.

The replacement filter is intended for cold tap water only. After the filter replacement, discard at least 10 litres of filtered water.

FAQs

 

 

Where would I put it and how much room do I need to fit it?

The unit should be located as near to the water feed into the property as possible. On top of the dimensions stated above you must allow at least another 10cm of space below for changing the filters.

 

Do I need a separate drinking water system or can I drink the water from the whole house system? 

The Wholehouse Unit does improve the quality of the water by taking out the more common contaminants. It is removing contaminants from your entire household demand and consequently high water flow. The whole house system is made to remove the most common contaminants from a high flow of water. To remove bacteria, cysts and trace organics, we recommend the addition of a drinking water system.

 

Who would install the unit?

Full instructions are supplied with the unit and can be installed by someone with good DIY skills. Alternatively a local plumber should have no problem installing this unit.

 

Is there a water pressure drop when using a Wholehouse Unit and if so, what is it likely to be?

There can be a 5% – 10% drop in pressure depending on which cartridges you have. If you have a megaflow system or already have low pressure a flexible fitting kit can be used. If your flow rate exceeds 5.33 bar (80psi) a pressure regulator must be fitted to reduce the pressure to 70psi.

 

How often should I change my filters?

The pre-filter should be changed every 6 months. The carbon blocks should be changed every 6, 9, or 12 months depending on how many persons in the household. Take a look at the Filter Replacement Service tab for peace of mind. Should you require replacements earlier please let us know and we will update our records.

 

Does the whole house unit take out oestrogens?

Activated carbon will remove organic compounds like oestrogen. The main cartridge in the wholehouse units is made of activated carbon.

 

General Information

Once you have removed the old filters, we recommend running chlorinated water through your whole house filter system for 5-10 minutes before installing the replacement filter.

 

Bore Holes – If you have a bore hole please contact us for both wholehouse filtration and drinking water system advice.

 

The pressure requirement for town pressure is 3 bar.

 

Filter Replacement Service

Whether you purchase air purifiers, dehumidifiers or water filters, or any of their replacement parts we offer you peace of mind. We will add your name to our reminder service. In accordance with the manufacturers’ guidelines we will send you a gentle reminder that your unit may need replacement parts. Maintaining its efficiency will continue providing you a healthier environment.

We will be able to supply you with your required replacements. We maintain stock levels of filters and cartridges even after a manufacturer may bring the original unit to an end. This means our customers can rest assured of our commitment to servicing their requirements long into the future.

If you do not wish to be included in our service then we can simply unsubscribe you. Similarly, if you have not purchased the units or replacements from us before you may ask to be included in our service for future use.

With best wishes

                             The Healthy House® Team

You may also like…

Expert Advice
Free Shipping
5 Star Reviews
Secure Shopping